Lets review this crap-tastic selection, Warning: I am about to be overly negative
http://www.sigsauer.com/Catalog/sig-sd-silencers.aspx
9mm suppressor:
<4" and 3.7oz, this is a micro suppressor
No Booster or pistons
Only threaded in 13.5x1LH.
Designed to be run wet
Someone remind Sig that we aren't all on a special op where we have to hide our cans and only need suppression for a shot or two
22lr Suppressor:
Aluminum tube/ stainless baffles
Has replaceable back plate for different(read as: rarely used) thread pitches (1/2x28, M9, and 3/8 threads
6.2" and 7.8oz(about normal I suppose)
5.56 Suppressor:
Entirely stainless
2" diameter(Industry standards be dammed)with a 1.5" rear diameter for partial rail recess(can you say flaming hot handguard!)
6.8" at 23.5oz (not especially light, but I suppose somewhat shorter than others)
Wow is this can ugly! honestly they should have just committed to 2" and not put that taper in. Also the threading on it looks like a nut welded onto the thing, absolutely atrocious.
7.62 Suppressor:
Exact same specifications as the 5.56 can, just a larger bore diameter.
http://www.sigsauer.com/Catalog/sig-sd-silencers.aspx
9mm suppressor:
<4" and 3.7oz, this is a micro suppressor
No Booster or pistons
Only threaded in 13.5x1LH.
Designed to be run wet
Someone remind Sig that we aren't all on a special op where we have to hide our cans and only need suppression for a shot or two
22lr Suppressor:
Aluminum tube/ stainless baffles
Has replaceable back plate for different(read as: rarely used) thread pitches (1/2x28, M9, and 3/8 threads
6.2" and 7.8oz(about normal I suppose)
5.56 Suppressor:
Entirely stainless
2" diameter(Industry standards be dammed)with a 1.5" rear diameter for partial rail recess(can you say flaming hot handguard!)
6.8" at 23.5oz (not especially light, but I suppose somewhat shorter than others)
Wow is this can ugly! honestly they should have just committed to 2" and not put that taper in. Also the threading on it looks like a nut welded onto the thing, absolutely atrocious.
7.62 Suppressor:
Exact same specifications as the 5.56 can, just a larger bore diameter.
