Taurus tx-22 TORO w/Viridian optic and 5 mags $340 shipped

[Tactical Dalai Lama]

Update, works fine unsuppressed. Suppressed is the finicky side, gonna have to try different combos of optics and weight on the slide.

Also my buddy put a holosun k optic on his and it just about immediately stripped the threads in the slide, so just a heads up be safe on how much torque you use for the optic. I was below the torque spec and it still stripped it. Easy fix though

 

[BillsCamino]

Taurus TX22 Compact, .22 LR, 3.5' Threaded Barrel, 5x 13rd Magazines, Pistol w/ RFX11 Green Dot

<h1 data-end='325' data-start='207'>Taurus TX22 Compact, .22 LR, 3.5" Threaded Barrel, 5x 13rd Magazines, Pistol w/ RFX11 Green Dot</h1> <p>Kit Contains 1x - 7253279435871 TX22 Comapct w/ 5 Magazines and 1x - <span class='highlighted-text'>754003936711 Viridian RFX11 Green Dot (no packaging or...

battlehawkarmory.com

 

[jeepnuts]

Update, works fine unsuppressed. Suppressed is the finicky side, gonna have to try different combos of optics and weight on the slide.

Also my buddy put a holosun k optic on his and it just about immediately stripped the threads in the slide, so just a heads up be safe on how much torque you use for the optic. I was below the torque spec and it still stripped it. Easy fix though

Below the torque spec is probably why it stripped the threads. The screws aren’t designed to be pegs holding the optic in place. They aren’t designed for shear loads. they’re providing clamping force which is what keeps the optic in place. Torque values exist for a reason.

 

[Tactical Dalai Lama]

Below the torque spec is probably why it stripped the threads. The screws aren’t designed to be pegs holding the optic in place. They aren’t designed for shear loads. they’re providing clamping force which is what keeps the optic in place. Torque values exist for a reason.

Okay so sorry let me be more clear for the guy who for sure assumes he knows more than me, I am a idiot, I used a torque a screw driver to make sure I was in spec and spec is 15 inch-pounds (in-lbs) according to all the sources; and that’s standard factory spec for most optics on pistols. I went to 14 since it’s a aluminum slide and work my way up to 15 for this reason since my screwdriver and increase/decrease in increments of 0.01, and it still stripped the screw hole most likely because it’s Taurus, not because “tHe tOrQue vALUes eXiST fOr A rEaSoN” come on bro why you gotta be a doush.

Additionally for anyone who wants to know. About 4 other people I know who have this gun haven’t had the issue. My money is on factory defect, but again it’s a easy fix if you are good with your hands

 

[fuelman1]

On another more positive note. Mag Shack sells 21 round Pro Mag magazines for $18.95 ea. $5.99 for shipping for 2 of them. They function like factory mags. Not a bad deal compared to $31 for a factory 22 round mag.

 

[jeepnuts]

Okay so sorry let me be more clear for the guy who for sure assumes he knows more than me, I am a idiot, I used a torque a screw driver to make sure I was in spec and spec is 15 inch-pounds (in-lbs) according to all the sources; and that’s standard factory spec for most optics on pistols. I went to 14 since it’s a aluminum slide and work my way up to 15 for this reason since my screwdriver and increase/decrease in increments of 0.01, and it still stripped the screw hole most likely because it’s Taurus, not because “tHe tOrQue vALUes eXiST fOr A rEaSoN” come on bro why you gotta be a doush.

Additionally for anyone who wants to know. About 4 other people I know who have this gun haven’t had the issue. My money is on factory defect, but again it’s a easy fix if you are good with your hands

I didn’t assume. You said you torqued it less than the called for value. Glad you clarified. Sorry they stripped out on you.

 

[fuelman1]

I found a chassis from Calloway Design. It was $89 or so. It didn’t come with the M1913 brace. I had one on my Charger that I’ll move back and forth. Pretty solid design. It’s a game changer with this and the FRT. Very comfy and easy to control. On another note, the Pro Mag 21 round mags haven’t worked well with the FRT. the factory mags have.

 

[Jackspack]

I found a chassis from Calloway Design. It was $89 or so. It didn’t come with the M1913 brace. I had one on my Charger that I’ll move back and forth. Pretty solid design. It’s a game changer with this and the FRT. Very comfy and easy to control. On another note, the Pro Mag 21 round mags haven’t worked well with the FRT. the factory mags have.View attachment 9563983

I grabbed a chassis as well. It is a nice add.

 

[Tactical Dalai Lama]

I picked up a cheap viridian optic adapter RMSc to Acro, put the Steiner mps on it with a x300 and it runs perfectly suppressed. Using a rugged oculus 22 with standard blazer lead nose 38g rounds. I had to do about two mags of break in but after that you can shoot all your mags back to back with about 98.5% reliability