• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

Search results for query: *

  1.

    A Tale of Two Crush Washers, or Two Crush Washers One Barrel, and other AR oddities

    @cmshoot how many AR riffles do you work on per year to get this many problems and any manufacturers should we stay away from that has higher percentage of these problems. ( not the owner inflicted ones of course we know who did those lol)

  2. AR issue, help needed

    i will assume you checked the ammo and used different ammo to rule out that. Did it fire correctly at one time? If so recheck amy work you did. if i was to guess i would think you changed grips and moved the spring and detent which applies pressure to the safety ty somehow. you can pull the...

  3. 10/22 TacSol with Light

    I do beleve a bolt on gas block for an bull barrel ar15 are the same diameter a few companies make them with a rail on them here is an example https://yhm.net/railed-bull-barrel-gas-block.html

  4. Glock 20 10mm - hot ammo- need advice

    Once you get hot loads and reload the barrel will be a problem with the Glock buldge but there is a Lee die to fix this. The stock spring will take a hot load but spring will make your hand feel better after shooting a bunch. I used to shoot 220 hot loaded stock and lone wolf barrel. There is a...

  5. AR lowers, what’s the diff?

    https://www.ar15.com/forums/ar-15/AR_Lower_Receiver_FAQ__56k_beware__MMS__CMT__LAR__LMT_compared___/12-318113/? here is a little reading on some differences some worth noting

  6. AR lowers, what’s the diff?

    Anderson’s lowers are fine I have had bushmaster, psa, spikes tactical, and Anderson all three fairly low on the price list and no problems with any. An ar15 is a battle riffle not a show piece fit and finish should not be needed just fit. To my memory there are only 4 or five companies that...

  7. The Worst AK Build I Have Ever Seen, Bar None Forgotten Weapons

    With the front flying off it seems to be a single shot wether it was built full auto or not

  8. Bushmaster new vs old

    Bushmaster... the old ones are better built I know they used better barrels in Wyndham manufacturing days any other parts different now freedom group bought the brand name

  9. chinese parts stopped by customs?

    They were worth 7.29 on average so primary arms and holsun are probably out I would guess ncstar or something similar to get the average that low. Lots of bird cage flash hiders, springs, crush washers etc

  10. Price guide site?

    My formula is Lowest price you can find on the internet for new Substract 10% for LNIB and there is no tax Keep subtracting until you get to the lowest price you ever saw (crack head specials not included cause they are stolen and you know it lol) that is your police trade in condition Now...

  11. Mini 14 help

    Are the rings set up front and rear? if so reverse them I know the super red hawk is large and small for front and rear not sure if there are others out there

  12. 460 Rowland

    Well I hope we don’t get sidetracked about the origins of another round instead of the greatness of the 460

  13. 460 Rowland

    I always thought that maybe I’m getting it confused with 45 long colt

  14. 460 Rowland

    I had a g21 it was like a 10mm in recoil maybe a little more

  15. 460 Rowland

    That is correct, the oal is the same as 45 but the 460 has the bullet seated in a bit more due to the extra length of the case

  16. 460 Rowland

    Same it is only a longer 45 brass that is a little stronger. So Glock has 13 for 45 and 460. The 45 is a old black powder cartridge so it has a lot of space for new powder. But the 460 was made longer to not chamber in the 45 so there is no catastrophic damage. You need a new spring also Glock...

  17. 460 Rowland

    Got the barrel for a Glock this thing is powerful. You must have a compensator or you can damage the gun. You also should be a reloader cause there are only a few makers of the ammo. Just like advertised it is 44 mag powerful.

  18. Glock 10mm GEN 4 interchangability questions

    I'm looking for a frame if you don't want both after you swap around and such

  19. Large frame Glock IWB?

    Did it without the light. The weight is not bad but you can't sit in a sports car but the seats are so narrow I can't do that outside the waist band either.

  20. **Mcnalley trigger kit for Glock!?

    Got one love it but I feel you can do one cheaper that is just as good but it would be from three manufacturer s . I will do that next time but the McNally is top notch the zevs are just too expensive on all there stuff. I feel the McNally with the wide trigger shoe feels great and functions...
Back
Top Bottom