Bolt bounce issues AR15

[Tacticool]

Trying to get the bolt bounce issue figure out on my PSA 10.5 pistol with a carbine gas system, I've installed a cmmg adjustable gas block, a h3 buffer weight and a stronger flat wire buffer spring to try to tame it yet I'm still encountering bolt bounce/light primer strikes no until I turn the gas down to where it won't reliably cycle, is a h4 or h5 possible what it needs?

 

[Retired Army]

cmshoot

 

[cmshoot]

I’m happy to look at it at TruPrep in Marietta.

Have you measured your gas port?

 

[BigMike]

In for info.

 

[Tacticool]

I’m happy to look at it at TruPrep in Marietta.

Have you measured your gas port?

I haven't but does it matter with the adjustable gas block? I can turn it until it doesn't cycle reliably while still having bolt bounce

 

[eightnsand]

Trying to get the bolt bounce issue figure out on my PSA 10.5 pistol with a carbine gas system, I've installed a cmmg adjustable gas block, a h3 buffer weight and a stronger flat wire buffer spring to try to tame it yet I'm still encountering bolt bounce/light primer strikes no until I turn the gas down to where it won't reliably cycle, is a h4 or h5 possible what it needs?

It needs you to quit modifying and ****ing around with an engineering marvel.
GLWStrikepressure.
You asked.

 

[Moondog1]

Trying to get the bolt bounce issue figure out on my PSA 10.5 pistol with a carbine gas system, I've installed a cmmg adjustable gas block, a h3 buffer weight and a stronger flat wire buffer spring to try to tame it yet I'm still encountering bolt bounce/light primer strikes no until I turn the gas down to where it won't reliably cycle, is a h4 or h5 possible what it needs?

Do you have a can on it? Still looks over gassed. Also, something is squirting out of your drum. Have you tried using a carbine buffer and turning the gas up slowly until it runs and will lock back on an empty mag?

 

[Tacticool]

It needs you to quit modifying and ****ing around with an engineering marvel.
GLWStrikepressure.
You asked.

Calm down there Mr fud, a psa di ar is hardly an engineer marvel, it has a FRT trigger in it because daddy government says i can't buy a real m4 so I'm having to make **** work

 

[Tacticool]

Do you have a can on it? Still looks over gassed. Also, something is squirting out of your drum. Have you tried using a carbine buffer and turning the gas up slowly until it runs and will lock back on an empty mag?

No can, I had the gas turned up too high in this particular video, i have turned the gas down far enough that it wont reliably cycle but still getting bolt bounce/light primer strikes. That was lube shooting out, I was told try and soak the bolt with lube as a possible remedy but it didn't help.

 

[Moondog1]

Calm down there Mr fud, a psa di ar is hardly an engineer marvel, it has a FRT trigger in it because daddy government says i can't buy a real m4 so I'm having to make **** work

You left that part out about the trigger.