I broke my trigger on my psl. Wanted to know if anyone could recommend someone to fix it and 2 mags that are not sitting right.
-
ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info
Broke my PSL, Needs trigger work and mag work
- Thread starter madmarinehays
- Start date
I had these guys http://www.inrangec2.com/finish a build for me a while back and they did great work. I am sure there is someone more local though.
https://www.apexgunparts.com/product_info.php/products_id/1562
stock trigger groups are fairly inexpensive or you could go for a red star arms adjustable
..What broke? http://www.novarata.net/Linx310/fcgremoval.shtml give step by step replacement procedure.
stock trigger groups are fairly inexpensive or you could go for a red star arms adjustable
..What broke? http://www.novarata.net/Linx310/fcgremoval.shtml give step by step replacement procedure.
Well its an adjustable trigger. I was told it was a Timeny trigger, but I don't believe that to be true. It does need some work. 2 of the 4 mags I have dont sit right which cause failure to feed. The bolt will stick to the rear sometimes. I believe it is caused by hammer sitting to high and catching on the bolt. The hook is the part that broke. This was caused by the trigger pin becoming loss while firing. ??? Thoughts?
The PSL has a bolt hold-open device after the last round is fired. It is activated by the mag. You can manually activate it without a mag by placing your finger in the magwell and lifting up.
If the spring on the device is missing/defective, it could hold the bolt open on a random basis.
Can you take some close up pics?
If the spring on the device is missing/defective, it could hold the bolt open on a random basis.
Can you take some close up pics?
Not finding anything like that on my psl
I found what is in the picture but missing some of it.
