Hodgdon
Internat'l
CCI 209
WAA20F1
14.5
9,300 PSI
1,200 Is this it?
Internat'l
CCI 209
WAA20F1
14.5
9,300 PSI
1,200 Is this it?
Hodgdon Universal Vs. International for 20 Gauge Skeet Loads.
- Thread starter Guthrie
- Start date
Hodgdon
Universal
Win. 209
WAA20F1
17.5
8,300 PSI
1,200 this is what your using right
Universal
Win. 209
WAA20F1
17.5
8,300 PSI
1,200 this is what your using right
Yes sir that one
I myself would probably use the cb1078 wad, your pressure is low so i don't see a problem.
BUT this is a choice you you would have to make,
BUT this is a choice you you would have to make,
Let me know how they work out for you
I will for sure, thank you for all the info. I think im going to go ahead and try it. The wad is for 7/8 ounce loads and i think its a low enough pressure.
I think it's a safe load,, CK out that web site,, you'll enjoy it
Keep your hull separate when using the EURO primers,, there a bit larger then the w209 primers and they will in large your primer pocket.
Keep your hull separate when using the EURO primers,, there a bit larger then the w209 primers and they will in large your primer pocket.
Yeah i was reading about that. I also read that it wasnt too hard to swage out the pocket. Do you know anything on that?
I used to load those Walmart-Cheapo- Winchester Universal Hulls with Claybusters 7/8 oz until an old timer suggested to use AA Hulls. They work but I would use caution.
