I have 37mm 3D printed products available. All prices do not include shipping. PayPal, Venmo, cash app, good old fashioned postal money order accepted. Also on eBay under Dixie Thumper if you prefer.
Adapters:
37 to 26.5mm flare 3D printed and steel lined 75mm (2.95”) $8 ea
37 to 12ga flare 3D print (solid infill) orange or black $12 ea
37mm Chalk rounds: 5 piece hybrid design - you assemble (easy) without brass tubing, primer, powder or chalk - per round $3.25. 20 or more $3. With chalk add .15cts per round. (No color choice - will be blue/orange or red most likely)
5” long range projectiles- finned “bomblet” type design. Hollow cavity, fused or un fused your choice (3 or 4mm fuse hole) with threaded top flat cap (these are 34.4mm diameter designed for the 5” aluminum casings) and a powder push plate that the fins set on in the case. $5.00 ea
5” whistle round - same design as above but slip fit onto bottom half of finned round with push plate as well. Fused or un-fused your choice - $6 per round. (Whistle top has hollow cavity, these will need to be hot glued to the tails.
Extra pushers for the chalk rounds:
.50 cts ea, 20 or more .40cts ea.
Nose cone m781 style windscreens for 37mm chalk .30 ea (colors) .35 ea translucent.
26.5mm - printed 209 shells and chalk projectiles $1.25 ea. 50 or more $1 ea (hull, pusher (short) and nose cone. Long pushers and cones add .10 cents per pusher.
37mm printed shells - your choice - these are redesigned and have a stepped powder cup. 34.4mm inside diameter like the aluminum shells.
Lengths: 1.8”, 2”, 2.5”, 3” $1 ea. 20 or more .90 cents each.
Lengths: 3.5”, 4”, 4.5”, 5” $1.25 ea. 20 or more $1.10 ea.
Longer shells by request. Allow lead time for R&D and printing.
I also have wads for DD registered 37 owners for shot and cards that fit the wads. Special order for those.
Fireworks tube pushers (wad type and tube types) .60 cents each 50 or more .50 cents each.
DM with any questions or specific photos you are curious about. Thanks!!
