This is a Dillon Square Deal press in 38 Special. This was purchased by a family member I would guess at least 20 years ago but has probably seen very little use. Everything works well on the press but it does have the older spring return on the powder measure rather than the newer bell crank linkage. At one time Dillon would upgrade for free but I don't know if they still do, it works very well as it is. Price is $350 firm. I am willing to meet in the SW Georgia area most days.
If you are not familiar with Dillon, the Square Deal is considered their entry level press. If you want a dedicated 38 Spec press, it is a good choice. If you want to load multiple calibers with a single press, a 550 or 750 would be a better choice. Square Deal dies are not standard 7/8x14, they only fit the SD, are relatively expensive and slow to change.
If you are not familiar with Dillon, the Square Deal is considered their entry level press. If you want a dedicated 38 Spec press, it is a good choice. If you want to load multiple calibers with a single press, a 550 or 750 would be a better choice. Square Deal dies are not standard 7/8x14, they only fit the SD, are relatively expensive and slow to change.
