Item has been relisted, you can find the new listing at: https://www.theoutdoorstrader.com/threads/fs-ft-new-lwrc-six8-spr.2110769/
Item Name: FS/FT New LWRC Six8 DIY
Location: Roswell
Zip Code: 30075
Item is for: Sale or Trade
Sale Price: $1900 OBO
Trade Value or Items Looking For: $2200
Wide open on trades but partial to factory piston guns. Perhaps one of those limited run LWRCs in 5.56 or an LMT. Can also add cash for the right deal. Interesting rifles or pistols also considered but would keep in the .223/5.56/.308/762/9 mm variety.
Caliber: 6.8 SPC II
Willing to Ship: No
Bill of Sale Required?: No
Item Description:
This was going to be a project of sorts for hog hunting, but I don’t have the time to pursue it and am offering it up to someone who may want to make this their own. This requires someone who knows how to assemble an AR but with some appreciation for the additional steps for the ambi controls (I.e., more roll pins). If you can secure a lower receiver and use a pin punch, you can assemble this.
Cerakoted white LWRC Six8 SPR by Mod Outfitters in TX.
The upper was converted (by LWRC) to an A2 quad rail (my preference), but it is the midlength self-regulating piston gas system.
The white cerakote needed base layers so the fitting is tight, especially at contact points which you can see, but rifle is 100% functional. The only rounds fired through it are by LWRC to confirm function after the 14.7 pin/weld and from initial test firing at the factory.
Price reflects the current disassembled status of the rifle, LWRC A2 value and estimated labor if you have someone else reassemble the lower.
I was quoted $200 by a local cerakote applicator to media blast the white off and reapply any color so I adjusted price down to reflect this in case the white doesn’t do it for you. Lower has mark near bolt catch from removal, but does not hit actual metal and once re-coated, no marking will be visible. Again price reflects this (pic upon request).
- LWRC Six8 stripped lower receiver w ambi controls
- LWRC NiBo fire control group
- LWRC skirmish sights
- LWRC ambi QD end plate
- LWRC NiBo bolt carrier
- LWRC ambi charging handle
- LWRC advanced combat Six8 bolt (lobster tail extractor)
- LWRC RailSkin handguard covers
- LWRC 1-10 CHF NiCorr Heavy Barrel
- NIB Vltor EMOD stock
- Forward Controls 6310KM muzzle device p/w (compatible with Dead Air)
- Magpul 30-rd Six8 PMag (New)
PM any questions, will leave this up for a bit or throw back in the safe if no interests. **If interested, I can reassemble the lower but price will be adjusted**
Pictures:
Item Name: FS/FT New LWRC Six8 DIY
Location: Roswell
Zip Code: 30075
Item is for: Sale or Trade
Sale Price: $1900 OBO
Trade Value or Items Looking For: $2200
Wide open on trades but partial to factory piston guns. Perhaps one of those limited run LWRCs in 5.56 or an LMT. Can also add cash for the right deal. Interesting rifles or pistols also considered but would keep in the .223/5.56/.308/762/9 mm variety.
Caliber: 6.8 SPC II
Willing to Ship: No
Bill of Sale Required?: No
Item Description:
This was going to be a project of sorts for hog hunting, but I don’t have the time to pursue it and am offering it up to someone who may want to make this their own. This requires someone who knows how to assemble an AR but with some appreciation for the additional steps for the ambi controls (I.e., more roll pins). If you can secure a lower receiver and use a pin punch, you can assemble this.
Cerakoted white LWRC Six8 SPR by Mod Outfitters in TX.
The upper was converted (by LWRC) to an A2 quad rail (my preference), but it is the midlength self-regulating piston gas system.
The white cerakote needed base layers so the fitting is tight, especially at contact points which you can see, but rifle is 100% functional. The only rounds fired through it are by LWRC to confirm function after the 14.7 pin/weld and from initial test firing at the factory.
Price reflects the current disassembled status of the rifle, LWRC A2 value and estimated labor if you have someone else reassemble the lower.
I was quoted $200 by a local cerakote applicator to media blast the white off and reapply any color so I adjusted price down to reflect this in case the white doesn’t do it for you. Lower has mark near bolt catch from removal, but does not hit actual metal and once re-coated, no marking will be visible. Again price reflects this (pic upon request).
- LWRC Six8 stripped lower receiver w ambi controls
- LWRC NiBo fire control group
- LWRC skirmish sights
- LWRC ambi QD end plate
- LWRC NiBo bolt carrier
- LWRC ambi charging handle
- LWRC advanced combat Six8 bolt (lobster tail extractor)
- LWRC RailSkin handguard covers
- LWRC 1-10 CHF NiCorr Heavy Barrel
- NIB Vltor EMOD stock
- Forward Controls 6310KM muzzle device p/w (compatible with Dead Air)
- Magpul 30-rd Six8 PMag (New)
PM any questions, will leave this up for a bit or throw back in the safe if no interests. **If interested, I can reassemble the lower but price will be adjusted**
Pictures:
