Like New - Aimpoint H1 2 MOA Red Dot w/ ADM Quick Detach Mount Lower 1/3 Co Witness (1110) $475
The mount is $110 New, alone paid 520 for the site
I paid Full Price for the H1 Never used.
and ADM
The AD-T1 micro mount is designed for the Aimpoint T1/T2 lower 1/3 co-witness heights are offered in Black. This mount is designed to fit the T1/T2, H1/H2 Red Dots as well as the Crossfire and Romeo 5 Red Dots. It will also fit red dots that share the same Micro footprint. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock(tm) Lever system to accommodate both in spec and out of spec rail systems. The CAS-V height mount was designed to provide a lower 1/3 co-witness solution preferred by SOCOM and works in conjunction with Vltor's CASV handguard system. Centerline height for the CAS-V is
The mount is $110 New, alone paid 520 for the site
I paid Full Price for the H1 Never used.
Micro H-1™
2 MOA - Red Dot Reflex Sight
- 2 MOA dot size
- 50,000 hours (over 5 years) of operation on one battery
- 12 intensity settings for use in daylight and low light conditions
- Lightweight – 84 g (3.0 oz) sight only and 116 g (4.1 oz) with mount
- Submersible to 5 meters (15 feet)
- Height of Optical Axis 19 mm (0.7 in) measured from top surface of mechanical interface
and ADM
FEATURES
- The AD-T1 Mount features the Patented QD Auto Lock™ Lever system.
- Does not require proprietary tools for adjustment.
- Can be adjusted with your finger or a flat blade screwdriver.
- Lever can be configured to lock to the front or the rear.
- Superior clamping surface to insure maximum rail engagement.
MATERIALS & CONSTRUCTION
- The AD-T1 Mount is precision CNC machined from a block of 6061 T6 aluminum.
- Precision machined from 6061 T6 Aluminum.
- Hard coat anodized for a lifetime of performance.
- Finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
- Fully adjustable to fit both in spec and out of spec rail systems.
- American Defense MFG, LLC. products feature a lifetime warranty.
- Features the Patented QD Auto Lock™ Lever system.
- Made with pride in the U.S.A.
The AD-T1 micro mount is designed for the Aimpoint T1/T2 lower 1/3 co-witness heights are offered in Black. This mount is designed to fit the T1/T2, H1/H2 Red Dots as well as the Crossfire and Romeo 5 Red Dots. It will also fit red dots that share the same Micro footprint. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock(tm) Lever system to accommodate both in spec and out of spec rail systems. The CAS-V height mount was designed to provide a lower 1/3 co-witness solution preferred by SOCOM and works in conjunction with Vltor's CASV handguard system. Centerline height for the CAS-V is
