Unfired PA10
2x magpul 25 round mags and 1x 20 round duramag and 1x sig MSR included.
The gas adjustment tool is still unopened.
May have some cosmetic blems. I had it all decked out, but a new large unexpected expense just hit me. I'd rather sell my modern firearms than my milsurps.
Upper DETAILS
Barrel Length: 18"
Gas System: Mid-Length
Barrel Profile: A2 Style
Barrel Steel: 416R Stainless Steel
Barrel Finish: Stainless Steel
Chrome Lining: None
Muzzle Thread: 5/8-24
Chamber: 308 WIN
Twist Rate: 1:10
Barrel Extension: M4-style
Diameter at Gas Block: .750
Gas Block Type: Low-profile 3 position click switch adjustable gas block
Gas Tube: Black Nitride Gas Tube
Muzzle Device: A2 Style Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: PA10
Handguard Type: PSA 15" M-Lok Free Float Partial Picatinny Rail with Anti-slip and anti-rotation features
Bolt Carrier Group Included: Yes, Toolcraft PA10 BCG with extra power extractor spring
Charging Handle Included: Yes, 7075 T6 CH Included
With enhanced durability and improved function, the new and improved PSA PA10 Gen3 is here. The Gen3 model offers a black nitride stainless gas tube to better resist high heat and corrosion while maintaining a glossy black finish. All Gen3 PA10 models come with a dimpled barrel for ease of gas block replacement if you choose to do so. We have also included a newly designed click switch 3 position adjustable gas block so you can specifically tune to your load.
Gen 3 Benefits at a glance:
Upper: Precision machined from forged 7075-T6 aluminum, then Black anodize hard coated to MIL-8625 Type 3 class 2. With enhanced dual retention anti-slip and anti-rotating handguards.
Gen 3 Relief Cuts to Accommodate a Wide Range of Aftermarket BCG's
Forged 7075-T6 Aluminum
Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
Mil-spec Diameter PA15 6-Position Receiver Extension
Palmetto State Armory 2-Stage Nickel Boron Fire Control Group
Palmetto State Armory Over-Molded A2 Grip, Black
Magpul STR Stock, Black
Twice Staked M4 Lock Nut
PA10 Short Buffer & PA10 Buffer Spring
Caliber: .308
Based on customer feedback we are pleased to announce the Gen 3 PA-10 Complete Lower Receiver! Using forged 7075-T6 aluminum, these lowers are precision machined and then black anodize hard coated to MIL-8625 Type 3 Class 2 specifications. This complete lower will include a 2-Stage Nickel Boron fire control group with A Magpul STR Stock and PSA Overmolded Pistol Grip. The PSA PA10 allows the same configuration flexibility as enjoyed by the AR15 and is an ideal platform for the .308 cartridge.
Gen 3 enhancements at a glance:
The Gen3 PA10 receivers are functionally compatible with the Gen1 and Gen2 upper receivers, however, we recommend matching Gen3 lowers to Gen3 uppers for best appearance and performance. There are external cosmetic differences when mixing Gen1 with Gen2 and Gen3 upper and lower receivers that some may not find appealing.
The AR10 platform does not enjoy a common design between manufacturers, like the AR15. As a result, there can and will be subtle differences in the parts kits of various manufacturers. Some parts, like the fire control group, are shared with the AR15 platform to preserve the options for upgrading. For best results, we recommend only using PSA PA10 parts with our uppers and lower receivers. We do not recommend using other manufacturers parts in our products.
2x magpul 25 round mags and 1x 20 round duramag and 1x sig MSR included.
The gas adjustment tool is still unopened.
May have some cosmetic blems. I had it all decked out, but a new large unexpected expense just hit me. I'd rather sell my modern firearms than my milsurps.
Upper DETAILS
Barrel Length: 18"
Gas System: Mid-Length
Barrel Profile: A2 Style
Barrel Steel: 416R Stainless Steel
Barrel Finish: Stainless Steel
Chrome Lining: None
Muzzle Thread: 5/8-24
Chamber: 308 WIN
Twist Rate: 1:10
Barrel Extension: M4-style
Diameter at Gas Block: .750
Gas Block Type: Low-profile 3 position click switch adjustable gas block
Gas Tube: Black Nitride Gas Tube
Muzzle Device: A2 Style Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: PA10
Handguard Type: PSA 15" M-Lok Free Float Partial Picatinny Rail with Anti-slip and anti-rotation features
Bolt Carrier Group Included: Yes, Toolcraft PA10 BCG with extra power extractor spring
Charging Handle Included: Yes, 7075 T6 CH Included
FEATURES
You asked, we listened! Palmetto State Armory is proud to release our Gen3 PA10 Barreled Upper Receiver! The Gen3 model has been enhanced to improve the reliability and longevity of our PA10 platform. This new platform includes several features that have never before been included on our PA-10 platform. We hope you enjoy these new features and look forward to your feedback!With enhanced durability and improved function, the new and improved PSA PA10 Gen3 is here. The Gen3 model offers a black nitride stainless gas tube to better resist high heat and corrosion while maintaining a glossy black finish. All Gen3 PA10 models come with a dimpled barrel for ease of gas block replacement if you choose to do so. We have also included a newly designed click switch 3 position adjustable gas block so you can specifically tune to your load.
Gen 3 Benefits at a glance:
- Dimpled 416R Stainless Steel Barrel
- 3 Position Adjustable Click Switch Gas Block
- Extra Power Extractor Springs
- 7075 T6 Charging Handle Included in all uppers
- Black Nitride Gas Tube
- Barrel Nuts properly torqued to military specifications
- Anti-slip and anti-rotation handguards
Upper: Precision machined from forged 7075-T6 aluminum, then Black anodize hard coated to MIL-8625 Type 3 class 2. With enhanced dual retention anti-slip and anti-rotating handguards.
Lower DETAILS
PSA GEN3 PA10 COMPLETE STR 2-STAGE .308 LOWER WITH OVER MOLDED GRIPGen 3 Relief Cuts to Accommodate a Wide Range of Aftermarket BCG's
Forged 7075-T6 Aluminum
Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
Mil-spec Diameter PA15 6-Position Receiver Extension
Palmetto State Armory 2-Stage Nickel Boron Fire Control Group
Palmetto State Armory Over-Molded A2 Grip, Black
Magpul STR Stock, Black
Twice Staked M4 Lock Nut
PA10 Short Buffer & PA10 Buffer Spring
Caliber: .308
FEATURES
The new and improved Palmetto State Armory PA10 Gen3 .308 lower is fully assembled and ready for your complete PA10 Gen3 Upper!Based on customer feedback we are pleased to announce the Gen 3 PA-10 Complete Lower Receiver! Using forged 7075-T6 aluminum, these lowers are precision machined and then black anodize hard coated to MIL-8625 Type 3 Class 2 specifications. This complete lower will include a 2-Stage Nickel Boron fire control group with A Magpul STR Stock and PSA Overmolded Pistol Grip. The PSA PA10 allows the same configuration flexibility as enjoyed by the AR15 and is an ideal platform for the .308 cartridge.
Gen 3 enhancements at a glance:
- Lower includes relief cuts for a broader compatibility with .308 BCG’s.
- Twice staked castle nuts
- Standardized carbine length buffer tube with short, heavy buffer
The Gen3 PA10 receivers are functionally compatible with the Gen1 and Gen2 upper receivers, however, we recommend matching Gen3 lowers to Gen3 uppers for best appearance and performance. There are external cosmetic differences when mixing Gen1 with Gen2 and Gen3 upper and lower receivers that some may not find appealing.
The AR10 platform does not enjoy a common design between manufacturers, like the AR15. As a result, there can and will be subtle differences in the parts kits of various manufacturers. Some parts, like the fire control group, are shared with the AR15 platform to preserve the options for upgrading. For best results, we recommend only using PSA PA10 parts with our uppers and lower receivers. We do not recommend using other manufacturers parts in our products.
