Does anyone have any experience with M1917's and may know why one won't chamber a round fed from the magazine? It seems like the round is being held up by the bolt face/extractor area and will only make it some of the way into the chamber before it is completely jammed. The round just does not want to slide up flush with the bolt face to be in line to chamber/fire. I thought maybe the extractor was the problem so I tried a new one and I'm still having the same problem. It will close perfectly normal while empty and I know its not a great practice but just to rule things out I tried and it will close on a round if one is dropped in the chamber first. Lastly to add, with the bolt out of the rifle I also can't get a round to slide up onto the bolt face without rotating the extractor out of the way which seems very wrong since the extractor is locked into that position until the bolt is rotated and fully in battery at the end of its travel. Any input would be greatly appreciated as I'm new to the platform and hopefully its something I'm just overlooking.