Need help in Warner Robins!

[borocane]

I recently traded for a shotgun and it came with a rail that I do not want on the gun, unfortunately the last screw I need to take out is completely stripped. I've tried everything I know how to do without resorting to power tools. That's why I came to my favorite place, the ODT. If anybody in the Warner Robins area could help me out with a dremal cutting tool to cut some slots into this screw so I can ge into it with a for head screw driver that would be fantastic. There might even be a 12 pack in it for you . Let me know if you can and/or willing to help. Thank you

 

[mudking2008]

get a flat head screw driver and a rage. stick the flat head into the rage so it wont scratch the barrel pry up and unscrew at the same time happened to a old 12 gauge

 

[Bypass]

get a flat head screw driver and a rage. stick the flat head into the rage so it wont scratch the barrel pry up and unscrew at the same time happened to a old 12 gauge

I like your sig line.

 

[letusbuyyourcar]

I'm across 75 in Peach Co but I don't have a Dremel. Got a big compressor and air tools you can use. But I'll have to get you to sign the damage waiver in advance.

 

[Blskypilot]

They make a tool u can get at Home Depot might work without the dremel. Gatorbit I believe it's called. It's a bit you chuck I. The drill then it'll grab whatever's left and back it out. Bout 50/50 it works. If you weren't 2 hrs from me I'd dremel it for ya

 

[borocane]

The screw is flush with the rail which is flush with the receiver so I can't get underneath it

 

[Gimli2]

You need to invest in some damaged screw removal tools like these:

http://www.amazon.com/Speed-Out-Dam...&qid=1404516503&sr=8-2&keywords=easy+out+tool

 

[MacTavish]

Rub some BACON on it.

 

[borocane]

Rub some BACON on it.

I can't seem to get the bacon from the kitchen to the living room. It keeps disappearing. Very strange

 

[Tylerls1]

I have a dremel if you end up needing to borrow one