Revolver Help

[vwthing1]

Have you tried different brands of 9mm ammo?

4 different brands,FMJ, hollow points, shot shells

 

[vwthing1]

This sounds like your problem to me.

Attention Taurus 905 owners ! solving the clip problem

Thanks for the link. I think thickness is the issue.

 

[vwthing1]

No way to shave them and ensure that all of them are the same thickness all the way around

Clips provided with the gun

Any way to shave down your moon clips a tad?

That may be all it needs.

Revolver tolerances are measured in thousandths of an inch.

Okay I spent 2 hours with a hand file last night and through 1 stroke at a time, I got one of the clips filed down so that the cylinder would lock up and advance to the next round. It is still tight, but at least we are moving in the right direction.

Don't have a way to measure what I took off, but it looks about half as thick as before.

 

[Egghead]

Moon Clip 9 MM Taurus 905 Stainless Steel Package of 1

 

[vwthing1]

TK Customs clips. Problem solved. Thanks for all help.

 

[BIKER13]

so, you get a NEW gun and it wont work and you have to source an aftermarket product to make it work.That aint right. Taurus should make it right

 

[1006]

As the gun 's owner: consider sending an e-mail link to this thread to Taurus Customer Service.

They may have simply under machined the cylinder for their moon clips.

S&W made a "clipless" 9mm on a K frame called the S&W547. I had one. It worked well. I sold it due to lack of factory support. It was originally intended for the Argintine Police.