![IMG_0426[1].jpg](https://theoutdoorstrader.b-cdn.net/data/attachments/42/42616-3e8d5bf10fc59bdd80513c8eefde6774.jpg?hash=Po1b8Q_Fm9 "IMG_0426[1].jpg")
how do i get this muzzle break off?
-
If you are having trouble changng your password please click here for help.
??!! sks help !!??
- Thread starter jtran1984
- Start date
- Status
how do i get this muzzle break off?
It looks like it may be pinned...you can see a pin in the slot of the brake right beneath the rifle's sight post. Typically, the original pin is driven out and another longer pin is put in it's place to keep the brake from sliding.
This one may not pinned at all--from this pic it looks like the original pin is in place.
Once you've determined that there is no pin holding it (or you have removed the pin with a punch) you will then have to tap the brake off the barrel with a wooden dowel or brass punch. Be careful or you will mar the finish.
This one may not pinned at all--from this pic it looks like the original pin is in place.
Once you've determined that there is no pin holding it (or you have removed the pin with a punch) you will then have to tap the brake off the barrel with a wooden dowel or brass punch. Be careful or you will mar the finish.
ive taken that pin out and its for the sights...its not conected to the break... im just starting to think i need to put some heat on it and it will slip off?
I've always removed mine by tapping with a dowel or punch. I've never used any heat. Good luck.
He got advice from the Russian surplus guru and decided not to take it. Hmmm.
X2 for this.
Set screw? Somewhere under the brake.
knock that pin out. knock the FH off.
method 1: Use a brass punch and you won't marr the finish but you'd have to brush off the brass.
Method 2: Use a wooden dowel and you wont even have to brush the brass off of the gun (put there by method 1).
Trust Billrube....trust...Billrube....trust..billrube....
method 1: Use a brass punch and you won't marr the finish but you'd have to brush off the brass.
Method 2: Use a wooden dowel and you wont even have to brush the brass off of the gun (put there by method 1).
Trust Billrube....trust...Billrube....trust..billrube....
Nah no set screw...., but I got it off, thanks bill, turns out I jut wasn't putting enough ass on it..
- Status
