Source for 6-48 scope base screws

[Outlier]

I have a new to me rifle that I am trying to mount a scope on. The screws that came with the scope base I purchased are too long and protrude through the receiver and impinge on the bolt. My Google-fu has failed me on where to procure some shorter screws. Will these work?

BROWNELLS LEUPOLD TORX SCREWS | Brownells

Check out BROWNELLS LEUPOLD TORX SCREWS | Brownells available Online at Brownells Today and many more Scope Mounting Tools products are available in our Optics Department.

www.brownells.com

 

[MuleShoe]

Those will work if it takes torx head type screws. If it uses bevel or flat screws those may not work. Call brownells and talk with a technician and they can help you with what you need to fix

 

[T30]

Use a Dremel cut off tool or a pedestal grinder to shorten the long screws. It’s easy.

 

[SE7702]

I solved that problem a couple years ago. I bought an assortment of firearm accessory screws from I think Midway if I remember correctly. Somewhere around 100 screws for $15 or $20 bucks. Different lengths and head shapes.

 

[cmshoot]

Shorten the screws. If you don't want to do that, Brownell's carries a goodly selection of 6-48 screws of various lengths, with various heads,

 

[JET 5.45x39]

sometimes you can get lucky with the selection at ace hardware or online using MCMaster Carr, just be particular about the grade of bolt and the finish type

 

[Lonegle57]

The local Ace has a section of gun screws, might want to check a local Ace in your area. Haven't looked specifically for
those screws but it might be worth a look.

 

[cmshoot]

If you were local to Marietta, I’d say bring it by TruPrep, as I keep a wide selection of screws in stock.

 

[Outlier]

I have ordered some hardware from Brownells as I haven't had the best of luck shortening and chamfering screws. I will report back if they will work or not.

 

[Outlier]

I ordered the two shortest sizes available and the shortest length, the 0.150 ended up being what I needed. There is a review about the black steel screws being a bit soft but I only needed one so I'm not too concerned about it.