10/22 custom build thread

[Hayata]

I have a Shooters Ridge stock/barrel combo but apparently they aren't offered any more.

She'll shoot dime-sized groups at 25 yds. with my home grown trigger job.

 

[superduty4wd]

View attachment 248819

Iam not sure why the gun would jam that bad. But I would guess that the feedlips of the mags would be a good starting point. I had some similar problems with butler crrek mags but not as bad.

 

[superduty4wd]

like really like the scope, nice setup.

 

[superduty4wd]

anyone use any of these mags ?

 

[superduty4wd]

The mags above are H3CR mags by the way.

 

[Omega]

far right. The one that needs sbrd. And its upsidedown

 

[RamRoddoc]

View attachment 258128 far right. The one that needs sbrd. And its upsidedown

I had to look real hard at that one. That is cool as all get out.

 

[RamRoddoc]

any suggestions ? thanks

If you tried the other suggestions, try a different brand of ammo, solid point 40 grains. An empty shell and 400, then 800 grit metal sanding paper to polish the feed ramp. Don't shorten it, or remove all the machine lines, just polish it up a bit.

Do the same with the bolt and extractor. Check the extractor tension and make sure it's not excessive or the channel it rides in is gritty (burs-debris). If it is clean it up so it operates smoothly.

Good luck.

 

[Omega]

I had to look real hard at that one. That is cool as all get out.

thanks. its my favorite