long story short I could get my suppressor apart a while back. I said screw it and continued using it. I primarily use it on a cz bolt action with accuracy in mind. I started having some inconsistencies and quickly decided it was because of the junk filled can. After a week of soaking in kroil, a good friend, a vise, and a little heat from a torch the can finally came apart. This is what was inside that didn’t initially fall out when the core was removed and after it was cleaned.
-
ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info
.22 suppressor build up after a few thousand rounds
- Thread starter CBeck
- Start date
long story short I could get my suppressor apart a while back. I said screw it and continued using it. I primarily use it on a cz bolt action with accuracy in mind. I started having some inconsistencies and quickly decided it was because of the junk filled can. After a week of soaking in kroil, a good friend, a vise, and a little heat from a torch the can finally came apart. This is what was inside that didn’t initially fall out when the core was removed and after it was cleaned.
Wooooo! Leaded up. Well done my friend. We’ve gotten a Sparrow at the shop locked up a few times but only once that bad lol. Had to soak it too and use an assortment of primitive tools to open it.
What’d you use to clean the mono-core? The dip, or soda blast or?
What’d you use to clean the mono-core? The dip, or soda blast or?
You might want to clean it just a little more frequently , dang that was a mess
Is that a Mystic-x?
- Joined
- Jan 7, 2013
- Messages
- 9,156
- Reaction score
- 8,170
too small for mystic.
I pop lead C's off the baffles in my Spectre II all the time. My integral is a MOFO to take the tube off if it gets neglected.
Yeah, the aluminum makes it a little harder for cleaning.
Which brand ammo are you using?
Solid lead or coated projectiles?
Solid lead or coated projectiles?
After cleaning, put a coating of Molykote 111 on everything. After 500 rounds, I wipe my baffles clean with paper towels.
