Another cheap ($550) 9mm carbine that takes Glock mags

[righter13]

Yikes. May need to spin that suppressor if you can and pull those up some.

Can is on tight. I am having to use a thread adapter due to the crazy 9mm factory threading.

 

[righter13]

33rnd mag dump at 7 yards offhand. 1 failure to feed. I think the feed ramp needs some working on.

 

[Hayata]

Goot lawt that group opened up with the silencer!

Thanks for the range report!

Can you post a vid with the 147s?

 

[batoncolle]

Can is on tight. I am having to use a threaf adapter due to the crazy 9mm factory threading.

Does HTA offer a 1/2 x 36 piston, booster, or whatever they use? If not I'd definitely consider either chopping and rethreading or just rethreading.

 

[WC1911guy]

Does HTA offer a 1/2 x 36 piston, booster, or whatever they use? If not I'd definitely consider either chopping and rethreading or just rethreading.

That sounds like the way to go. I think he was waiting to put it through it's paces before deciding on going the SBR route. So a chop and re-thread is on the menu anyway.

 

[righter13]

That sounds like the way to go. I think he was waiting to put it through it's paces before deciding on going the SBR route. So a chop and re-thread is on the menu anyway.

Exactly. The adapter is cheaper then the $200 stamp and 75 to thread it just to find out that it runs like poop.

 

[righter13]

Goot lawt that group opened up with the silencer!

Thanks for the range report!

Can you post a vid with the 147s?

I can but I didnt record while I was shooting today. To many other shooters at the range. I can tell you that the action cycling was the loudest part though. At least at my ear.

 

[batoncolle]

Exactly. The adapter is cheaper then the $200 stamp and 75 to thread it just to find out that it runs like poop.

The issue is the groups opening up. I'd expect the POI shift, but your groups w/o the can were much tighter. Although I can't really tell what the actual spread is obviously so it may just appear to be wide. I'd just want to rule out the thread adapter especially as contributing.

 

[righter13]

The issue is the groups opening up. I'd expect the POI shift, but your groups w/o the can were much tighter. Although I can't really tell what the actual spread is obviously so it may just appear to be wide. I'd just want to rule out the thread adapter especially as contributing.

I could always shoot it again w the adapter on and no can and see if that helps. Also my hands were going numb..

 

[ocean_glocker]

The groups with the 115gr were tight, but did you shoot the 147gr ammo without the can?