Benelli M4 mag and stock conversion help

[wsully454]

Hey y’all. I have a couple of questions about converting my m4 from 5 rounds to 7 rounds and adding the collapsible stock extension.

1. Does anyone know any gunsmiths around the Canton/Holly Springs/Woodstock area that can do the conversion?

And if not,

2. Is it easy to ruin the bluing/finish with a heat gun if I try to do it on my own?

 

[browndalton]

cmshoot is the person you would want to talk to.

 

[Nathaniel Brown]

The magazine tube is very easy to change. I installed a factory 7rd on mine. It took about 30mins total, a heat gun, and some red loctite. The heat gun will not damage it as long as you focus the heat correctly. I focused the heat on the tube, since it is steel and the receiver is aluminum.

 

[cmshoot]

I’ve done plenty of them. I work at TruPrep in Marietta.

 

[Spas-12 Owner]

I’ve done plenty of them. I work at TruPrep in Marietta.

He did mine!