Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Good job your welcomeUpdate.....got it out!
Thank you everyone who threw in some advice, I went to Home Depot and bought a 3/16" steel rod, $3...dripped some oil down the barrel and let it soak a few hours, couple of good taps and it came out.
Thanks D_Max.
Now to clean it up real good and only shoot brass....ha
2nd the Kroil it frees everything!!!!Kroil. Soak overnight and drive it out with a GI steel cleaning rod
Glad yours came out. I had the case from hell in a rem 700 that somehow gouged into the receiver on its way out...
Yea I was using a BB gun cleaning rod with a brass end on it, but it was bending the end I was tapping on. That's why I was wondering if Brake cleaner would hurt the finish inside the barrel.
When I was shooting sporting clays, we soaked our chokes in carb cleaner. It will dissolve about everything connected with combustion. Never saw anything that wouldn't wipe off after a night of soak. Just the cheapest carb cleaner you can get.