- Joined
- Jul 24, 2010
- Messages
- 4,387
- Reaction score
- 2,004
I have Lyman case gauges for .40 S&W as well as .308 and like them both.
However, the one in .223 that I received was out-of-spec.
While all of my Case Bodies gauge correctly within specification at .376, the Rim (which can be as large as .378) does not gauge; and only the rim appears to be too large on many of the once-fired cases that I gauged. I got the calipers out and set the jaws for .378. All of the The Lyman Gauge rejects had rims that were less than or just under .378. Those whose Rim passed had a diameter of .376 or a little less.
My conclusion is that the product was not manufactured correctly. I confirmed this with an Internet search ... Seems like lots of folks are having the same problem, and as others had stated, I called Lyman and was promptly told by their "technical expert" that he had no history of any .223 gauge ever failing to meet specification ... OR having been returned !? Not wanting to "Burst His Bubble" or even curse him a little, I immediately returned the gauge to Midway for a full refund. Midway noted that their system of customer feedback echoed my experience with the Lyman .223 Gauge and made note for a follow-up with Lyman (I will not hold my breath!). Needless to say that I will be very careful about any future purchase of a Lyman product!
However, the one in .223 that I received was out-of-spec.
While all of my Case Bodies gauge correctly within specification at .376, the Rim (which can be as large as .378) does not gauge; and only the rim appears to be too large on many of the once-fired cases that I gauged. I got the calipers out and set the jaws for .378. All of the The Lyman Gauge rejects had rims that were less than or just under .378. Those whose Rim passed had a diameter of .376 or a little less.
My conclusion is that the product was not manufactured correctly. I confirmed this with an Internet search ... Seems like lots of folks are having the same problem, and as others had stated, I called Lyman and was promptly told by their "technical expert" that he had no history of any .223 gauge ever failing to meet specification ... OR having been returned !? Not wanting to "Burst His Bubble" or even curse him a little, I immediately returned the gauge to Midway for a full refund. Midway noted that their system of customer feedback echoed my experience with the Lyman .223 Gauge and made note for a follow-up with Lyman (I will not hold my breath!). Needless to say that I will be very careful about any future purchase of a Lyman product!