Mak 90 furniture

[Mr.13]

Looking for some furniture for my mak 90. Want to replace the original furniture

 

[spistols]

Slant or straight back receiver?

 

[N.Ga.Trader]

What's the current furniture look like?

 

[Mr.13]

Im not sure. How can i tell.

 

[Mr.13]

What's the current furniture look like?

Its the original one with the thumb hole stock

 

[spistols]

Post a picture.

 

[Mr.13]

 

[spistols]

If the receiver is a slant cut, and you don't care about being 100% perfect, a regular AK stock works.

 

[Deron Dero Dero]

View attachment 3815405

You have to take the stock off to see. Some are straight cuts at the back like normal AK's and others have a slant cut. The theory I've read on that is they were gonna be underfolders before the '89 import ban came.

If you have a straight cut then regular AK furniture should work(that is regular Chinese furniture, Chicom receivers are a bit thicker than others), slant cut's a bit tougher. I would normally have said Ironwood Designs but they're closed up now. I had a milled MAK 90 a while ago with a slant cut, had a furniture set from Ironwood on it that was sweet.

He's a site makin furniture for em

MAK-90 Slant-Cut Stamped Stock

We have slant milled and stamped mak-90 to test fit on. All you should have to do it pound it on and sink your screws . Full sets of furniture will probably be made out of hickory. If you have a darker polytech brown we may do the stock in white oak . Comes with NON trapdoor, smooth or ribbed...

www.kalashnicarver.com

 

[Gingerbeard Man]

You have to take the stock off to see. Some are straight cuts at the back like normal AK's and others have a slant cut. The theory I've read on that is they were gonna be underfolders before the '89 import ban came.

If you have a straight cut then regular AK furniture should work(that is regular Chinese furniture, Chicom receivers are a bit thicker than others), slant cut's a bit tougher. I would normally have said Ironwood Designs but they're closed up now. I had a milled MAK 90 a while ago with a slant cut, had a furniture set from Ironwood on it that was sweet.

He's a site makin furniture for em

MAK-90 Slant-Cut Stamped Stock

We have slant milled and stamped mak-90 to test fit on. All you should have to do it pound it on and sink your screws . Full sets of furniture will probably be made out of hickory. If you have a darker polytech brown we may do the stock in white oak . Comes with NON trapdoor, smooth or ribbed...

www.kalashnicarver.com

I can attest to Kalashnicarver's work. He did my Mauser grip and brace extension for my Charger build. He just started making slant stocks.