Alchemy!It's easy enough to do, lots of folks do it with scrap. You can buy a "poor man's crucible" for $50, the MAP torch head and gas bottle are going to run about $60-$70. You'll want a surface capable of bearing that much heat to work on if needed. I'd use steel bullet molds only. Aluminum (Lee, Arsenal, etc.) molds will melt at about 1,200 degrees. Silver melts at about 1,700 degrees and steel is at about 2,200 - 2,500 degrees. Make certain you "smoke" the mold with a candle flame, get it black on the inside (with smut) before you pour otherwise the silver might not release.