Probably the most question I get asked is how to build a target stand to hold my steel targets. So thought I would post how I do mine. You just need four 2x4"x8' and one 2x6"x8'. And some long wood screws. Cost around $20 to make. Cut three of the 2x4" in half. Then use some small blocks 4 or 6"cut from another 2x4. I use scrap 2x4s for this. If you do not have scrap by another 2x4. Sandwich these blocks between 2 of the 2x4s that were cut in half. But the top block needs to be the width of the 2x4 from the top. The 4th 2x4 I center longwise on the 2x6. The rest should be self explanatory by looking at picks.
