- Joined
- Dec 11, 2013
- Messages
- 27,491
- Reaction score
- 108,790
Jar and a vacuum line have been my one-man brake bleeder for close to 50 years.
-
ODT Gun Show this Saturday! - Click here for info and tickets!
what brake bleeder system do you use
- Thread starter fz1boxer
- Start date
Jar and a vacuum line have been my one-man brake bleeder for close to 50 years.
Russell speed bleeders. They replace your regular bleed screw and have a check valve in them - fluid flows out, air won't flow back in.
Open the bleeder screw a 1/4 turn and just press the pedal to the floor. Slowly in and out until you're happy. I put some clear hose on mine, when there's no bubbles anymore I tighten it down and move to the next one. Always work from furthest from the master cylinder in to nearest.
I will NOT do a brake job on a car without them now. Every vehicle in my stable has them.
Open the bleeder screw a 1/4 turn and just press the pedal to the floor. Slowly in and out until you're happy. I put some clear hose on mine, when there's no bubbles anymore I tighten it down and move to the next one. Always work from furthest from the master cylinder in to nearest.
I will NOT do a brake job on a car without them now. Every vehicle in my stable has them.
a 2x4 cut to the appropriate length to push the pedal down and prop against the seat and the appropriate size wrench
