Search results for query: *

  1. I Need A Threading Tap

    do you have one yet, i do
  2.

    black powder snake eyes derringer help needed - hammer spring install

    long needle nose type vise grips should work fine

  3. MosinNagant bolt handle mods

    I agree, do it right or not at all. Have it cut off and a new one tigged on by someone that has the experience
  4.

    Mounting a scope

    Back off on the base screws at the lower side and see if it comes up. May have to shim your base

  5. Mossberg 500 magazine tube

    I have always used a strap wrench with powdered rosin
  6.

    Tiffany 1860 Army Blackhawk

  7. Tiffany 1860 Army Blackhawk

    One of my projects from the late ninetys. Started out with a S&W mod 29
  8.

    Tiffany 1860 Army Blackhawk

  9. 1/2x28 thread die

    Is this 12x28 0r 1/2x28
  10.

    Need help with a rivet

    I would measure rivet head, then drill a divit in a steel bar(that mimics the rivet head) that fits between bench vise jaws to support the rivet head. Then I would use an air hammer(rivet gun) to buck the rivet or you could just use a hammer and large punch. You will need help to hold it in...
  11.

    Georgia Bulldog Needs Some Silver

    If Mableton was in your travels I could fix you up. I have a lot of high and low temp from my gunsmithing days and some useful hints
  12.

    Mossberg forend tool needed to borrow

    Brian, you did have one

  13. Which Loctite for mounting a scope on a rifle

    Blue on mounts, nothing on ring screws

  14. Sporterized Remington 1903A3 need bolt repair

    It doesn't work that way, with another bolt the headspace may or may not be correct. You may need barrel work. Replacing the bolt knob is easy to do by someone who knows what they are dong. I \t has to be prepped jigged and tig welded with the proper filler rod
  15.

    Gun Stock Identification

    Boito shotgun

  16. Looking for someone to do checkering

    buy a se of tools cheap and practice on scrap and you will find a new fortay, its not hard but you have to practice a lot to get your confidence level up there
  17.

    Barrel Cut/Crown - Ported?

    You should have someone knowledgable look at this before its altered as you may have a collectable rifle and it would be a shame to ruin it. These older classic mausers are getting hard to find and they no longer make them
  18.

    Need advice on repairing crack on side of military surplus stock (pics)

    spread the crack as best you can without it cracking further. Mix small amount of acraglass (not gel) and fill the crack as much as it will take, use a hair dryer to warm the acraglas adding more as necessary, now use clamps to pull it up tight and remove any that oozes out. Leave clamped for a...
  19.

    AK BS Fail

    I have a new one with extractor and firing pin , it is chinese polytech priced at $55. if Mableton is within driving range. PM me if you are interested.

  20. 6-48 cap screws local??

    I have them if you want to drive to Mableton
Back
Top Bottom