• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

Addicted to Froglube!

I've done a couple of guns with it. It's a PIA to switch over if you follow their instructions but seems to work ok if you use brake cleaner and a heat gun.

You seem to waste a little when you clean the barrel using a wet patch vs Hoppes.
 
I use a cheap large heating pad from wally world. I put it on a old baking pan that has a cooling rack in it, put a sheet of aluminum foil on top of the pad. I put a few pistols down next then fold the heating pad and other side of the foil over it and put a towel on top of it. Bingo, keeps all the guns hot (for up to 1 hour) as I work on them...
 
Back
Top Bottom