Crossed Plug Wires????

[EMC45]

I just rebuilt my upper end on the Toyota 22RE....... Same truck I had to trouble shoot a few months back for an electrical issue. This time it was head gasket, water pump, timing chain set w/guides, etc etc.

Well after getting it all back together I gave the key a turn and when it cranked it was off and had a whining noise. I have read this could be the culprit of crossed wires. I put EVERYTHING back the way it came apart, but might have crossed wires due to fatigue and spending 3 days in a row (8+ hours each day) on this thing getting it all buttoned up.

So what do the experts think? It has oil, coolant, full tank of gas etc. New plugs.

 

[tas6691]

Its a 4 cylinder....check a firing order diagram and see if the wires are correct......

 

[Kahrnut]

Did you remove the distributor?

 

[BangBang]

22RE firing order....

 

[the_great_white]

Your timing advance may be too lean if you pulled the distributor.

 

[Kahrnut]

 

[jeep78]

Timing gears and crank set correctly?

#1 piston @ TDC of compression stroke when distributor rotor pointing @ #1 wire?

 

[EMC45]

Timing gears and crank set correctly?

#1 piston @ TDC of compression stroke when distributor rotor pointing @ #1 wire?

Yes. Ensured the stroke was TDC on #1.

 

[EMC45]

I honestly believe the squealing noise could be my belt tensioner

 

[tas6691]

smh