I don't know what this knock is we are hearing. It is supposed to be a royal pain to take the valve cover off this side so I haven't done that yet, anyone know any tricks? Please advise! I appreciate the help ODT.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I did the screw driver trick sounds like it's right under the middle of that valve cover. Could a rocker or lifter be loose? I've only taken the valve covers off of old stuff.hard for me to tell from the vid, but a mechanics stethoscope works wonders in pinpointing a noise. Cheap at harbor frieght. Or you can use a long screw driver held against your ear.
I did the screw driver trick sounds like it's right under the middle of that valve cover. Could a rocker or lifter be loose? I've only taken the valve covers off of old stuff.
Could be a sticking injector, try this: http://www.napaonline.com/en/p/CVR65740A
It is running just fine! No codes and no stumbles. I guess I'll pull each injector? Anyone know any tricks to removing a crown Vic valve cover without disassembling the whole car?Is it idling/running rough?