Need help - Anyone with a Uniflow Powder Measure

[Freshly Minted Georgian!]

Working on a gadget to alarm when powder level in the hopper is low and also estimate how many grains are remaining. I have measurements for Dillon and Hornady powder measure hoppers, I have a couple Lyman units downstairs that I'll measure, I don't have any Uniflow powder measures any more though.

Anyone with a Uniflow powder measure, would you measure the outside diameter at the top of the powder measure hopper?

 

[f250superduty]

There you are

 

[Freshly Minted Georgian!]

Thanks much sir! This is what I'm building.

 

[palmettomoon]

Thanks much sir! This is what I'm building.

That is so much cooler than the Dillon "alarm."

I'd be in for one!

 

[Freshly Minted Georgian!]

The "dillon" model is about 2.5". Hornady model is about 2.2", should be close enough to fit properly on the RCBS but I don't like slop so I may just make a little adapter sleeve for the RCBS Unflow just to make sure it's not wobbly.

 

[Freshly Minted Georgian!]

I do have a half dozen Dillon sized units completed. Three bright green, two white, one glow in the dark.

 

[Hunterrs]

No Dillon blue?

 

[StuP]

Very neat.

 

[rosewood]

Well, how much?

 

[Hunterrs]

Freshly Minted Georgian!