Reloading Pobjeda 9mm brass

[a__l__a__n]

I just received some mixed 9mm brass containing a number with the Pobjeda head stamp. The primers are unusual - with something like a tab folded across the middle (see picture). They don't have a normal-looking dent although this is fired brass. See picture.

The brass itself looks like reloadable brass. Has anyone here reloaded this stuff? Anything I should be aware of?

Thanks!

 

[D_Max]

if it is brass and you can remove the primers it should be ok, I never seen this brass but it looks ok

 

[jglenn]

looks more like an issue with the firearm that those came from.... Firing pin area.. primers when fired will flow into any area it can

 

[D_Max]

looks more like an issue with the firearm that those came from.... Firing pin area.. primers when fired will flow into any area it can

MG / Maybe?

 

[a__l__a__n]

Primer pokes out just like with any other fired brass. I have 65 of these and they all look like that. There is a single flash hole in the center of the bottom of the case.

It's apparently from MaxxTech ammo made in Bosnia.

http://www.cheaperthandirt.com/product/AMM-4205-10

 

[D_Max]

Single flash hole/ brass case , looks like it should be just fine

 

[Bambenz]

That mark on the primer looks like it was fired from a glock