I loaded my first ever rounds for a 300WM ladder test for a rifle Ive built with the intent of getting to 2000 yards. The result was very disappointing and I am looking for some advice as to where I may have gone wrong.
Ladder (Magneto Speed Sporter)
65.2 - 2660
65.4 - 2724
65.6 - 2701
65.8 - 2783
66.0 - 2702
66.2 - 2760
66.4 - 2765
66.6 - 2790
66.8 - 2782
67.0 - 2792
Load:
Norma brass
Hdy 208 ELD Match
IMR 4350
Winchester Magnum primers
Reloading kit:
Spartan press
Redding comp dies
Lyman Gen 6 powder dispenser
Rifle:
700 action
Rem 26" 5R fluted barrel
XLR Element chassis
All brass was steel pin tumbled, full length sized, trimmed to 2.610, inside and outside chamfered.
Ladder (Magneto Speed Sporter)
65.2 - 2660
65.4 - 2724
65.6 - 2701
65.8 - 2783
66.0 - 2702
66.2 - 2760
66.4 - 2765
66.6 - 2790
66.8 - 2782
67.0 - 2792
Load:
Norma brass
Hdy 208 ELD Match
IMR 4350
Winchester Magnum primers
Reloading kit:
Spartan press
Redding comp dies
Lyman Gen 6 powder dispenser
Rifle:
700 action
Rem 26" 5R fluted barrel
XLR Element chassis
All brass was steel pin tumbled, full length sized, trimmed to 2.610, inside and outside chamfered.