Shotgun Reloading Help.

[BLIP]

I was fortunate enough to pick up some reloading machines it doesn't appear I'm going to have a need for it appears that there's some parts missing can you guys just help me out identifying it?
I'm going to post it for sale and I have a rough idea of the value but I want to make sure I'm on target

 

[D_Max]

those are not for shotgun that's rifle and pistol loaders

 

[D_Max]

2 old rcbs presses and an powder thrower

 

[BLIP]

2 old rcbs presses and an powder thrower

I see they are missing the handles which should be an easy fix. I have seen prices all over the board. These hardly looked used. I need to price them right...

 

[pavogrande]

The powder measure appears to be missing the "drops" -
The Linked press appears to have the auto prime feed but no priming arm-
the "junior" style press appears to have priming arm but no feed -
The handles are easily made from cold rolled round stock .
RCBS may replace all the missing bits at no charge with their life time warranty policy -
All these tools are first class tooling --

 

[BLIP]

The powder measure appears to be missing the "drops" -
The Linked press appears to have the auto prime feed but no priming arm-
the "junior" style press appears to have priming arm but no feed -
The handles are easily made from cold rolled round stock .
RCBS may replace all the missing bits at no charge with their life time warranty policy -
All these tools are first class tooling --

Thank you very much.

 

[pavogrande]

The large press may be a "rock chucker"
the smaller press a "reloader special"
the measure a "uni-flow" - It should also have a 2nd cylinder - large & small
the drop tubes scree into the bottom boss -
Both presses can re load shotshell in the same manner as reloading pistol & riffle -
the threaded bushing is removed to accept lager diameter shotshell dies -

 

[BLIP]

The large press may be a "rock chucker"
the smaller press a "reloader special"
the measure a "uni-flow" - It should also have a 2nd cylinder - large & small
the drop tubes scree into the bottom boss -
Both presses can re load shotshell in the same manner as reloading pistol & riffle -
the threaded bushing is removed to accept lager diameter shotshell dies -

Will I be able to recover $300 out of this?

 

[pavogrande]

Rock chuckers still sell well but I am not the best guy on pricing -- too old, too cheap.
The reloader special while a good press is not partlculiarly better than any other "O" press.
Same with the uni-flow --
So far it has been my experience that older reloading stuff does not sell well on odt -
I would go to cast boolits web site for selling -
better photos of each item may help -

 

[BLIP]

Rock chuckers still sell well but I am not the best guy on pricing -- too old, too cheap.
The reloader special while a good press is not partlculiarly better than any other "O" press.
Same with the uni-flow --
So far it has been my experience that older reloading stuff does not sell well on odt -
I would go to cast boolits web site for selling -
better photos of each item may help -

Hey thank you very much. Obviously I know very little about this stuff. But it appears to be in really good shape and I always like to give my ODT buddies first shot.