Factory Iron sights are atrocious. Front sight is very tall and has a small dark brass bead that is invisible in any lighting conditions. Rear sight horns obscure peripheral view of the target. Rear site groove is too narrow for the front sight, e.g. no light side to side when properly indexing the bead. Rear sight elevator has a hump so tall that at when placed on the three (of 6) lowest notches your view of the front sight is fully blocked by the rear sight elevator. As such, more than half the adjustment range of the sighting system is unusable. (e.g. all short and mid range settings are effectively rendered unusable by the tall hump of the elevator itself- this may be why there are so many complaints bout shooting high, you're effectively sighting off the top of the rear elevator, not the rear sight blade.)
Win 94 parts left, Rossi r92 right. The Winchester 94 sight and elevator will replace the less desirable Rossi r92 components. (The Rossi Dovetail cut may be slightly larger than standard, if so, raise a pimple or two in the bottom of the cut with a punch to tighten the fit.)
Spare Winchester 94 sight in place and this problem is fixed.
Win 94 parts left, Rossi r92 right. The Winchester 94 sight and elevator will replace the less desirable Rossi r92 components. (The Rossi Dovetail cut may be slightly larger than standard, if so, raise a pimple or two in the bottom of the cut with a punch to tighten the fit.)
Spare Winchester 94 sight in place and this problem is fixed.