Do y’all use the RMR Sealing plate?

[Mr. Booshie]

http://www.trijicon.com/na_en/products/product3.php?pid=AC32064

 

[DerrickT]

Yep. I own a sealing plate by Trijicon. The battlewerx plates fit a little better. The Trijicon plates hang out the sides in my experience. YMMV.

 

[Mr. Booshie]

OP be careful to confirm the screw length too. It can interfere with your extractor plunger if it’s too long.

 

[nicaburns]

Battlewerx plates for me but I do not yet have a type 2... my understanding is that the type 2 does not need it for battery connection but benefits as a moisture barrier

 

[sovietak474u]

They make one for use with type 2. The anti flicker plates are not to be used on the type 2, they will damage your contacts.

http://www.battlewerx.com/sealing-plate-for-trijicon-rmr-type-2-dual-illum-models-black/

This is a subject I’ve been wanting to tackle . How can you tell if you have a type 1 or 2 ?

 

[Lazarus]

This is a subject I’ve been wanting to tackle . How can you tell if you have a type 1 or 2 ?

Look at the battery compartment. If you have 1 connector you have a Type 1, if you have 2 connectors you have a Type 2.

 

[DerrickT]

Yep. That.

 

[Spas-12 Owner]

$14 or less. Get it.

https://www.amazon.com/gp/aw/d/B00T31NK86/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1

 

[sovietak474u]

Look at the battery compartment. If you have 1 connector you have a Type 1, if you have 2 connectors you have a Type 2.

Well thanks ever so kindly sir . I need one of these plates as my RMR starts to cut on and off when I do too many mag dumps in a row .