Reloading 300 Blackout

[Shovelhead]

where did you get the jig from?

http://www.300blktalk.com/forum/viewtopic.php?f=179&t=80842&hilit=jig

 

[caw308]

We use a Hornady 110 grain V Max w/ 19.5 - 19.8 grains of Hogdon H110 .
This is with one of our 8.5" barrel guns chrono 2,150-2,180 fps.

Nosler 125 bullets with same SBR, 18.5 grains of H110. 2,000 fps. Both w/ CCI S.R. primers

 

[JWP6114]

We use a Hornady 110 grain V Max w/ 19.5 - 19.8 grains of Hogdon H110 .
This is with one of our 8.5" barrel guns chrono 2,150-2,180 fps.

Nosler 125 bullets with same SBR, 18.5 grains of H110. 2,000 fps. Both w/ CCI S.R. primers

Same load we are using... The 110's hammer on pigs from a 16" gun.

 

[darrenmd]

http://www.300blktalk.com/forum/viewtopic.php?f=179&t=80842&hilit=jig

Thanks.....

 

[JBKnifeworks]

There are a few guys on 300blktalk.com that sell brass.

 

[darrenmd]

There are a few guys on 300blktalk.com that sell brass.

Good link....I like the brass catcher.....

 

[darrenmd]

I am not sure how it happened.... but I was sent a 3 piece die set instead of the 2 piece I ordered.... at the same time I ordered the crimp die for it also.... now I have two crimp dies.... let me know if your looking for one.... I will give it to you for what I paid ($13 plus $5 (s/h) total $18)...... I will list it on the ODT Classified .... just giving participants in the thread priority......

 

[caw308]

@JWP6114

I haven't been able to test on pigs or coyotes yet, but should would like to.

 

[themayor]

Has anyone who reloaded 300 blackout noticed a difference when crimping vs not crimping?

 

[ngcsugrad09]

Has anyone who reloaded 300 blackout noticed a difference when crimping vs not crimping?

Not really.. although I use all factory .300 Blk brass.